This text is replaced by the Flash movie.
Why Tanks A Lot 1-800-948-2657
Tanks A Lot Watering System


Order Form & Pricing
Assembly
General Use
Accessory Support
Simple Maintenance
Brace & Band    
Burping the Tank    
Secure the Base    
Repressurize    
Diagnose a Leak    
Replacing Hose Arm/Tank    
Drilling New Frame    
Replace Hubcaps    
Install Casters    
Management Support



"We have two TANKS-A-LOTs. We use them every day to water or plants in two towers, 729 rooms, convention center, two-story lobby and a small shopping area. They get used a lot & work great!"
Ron Boettger
Marriott Marco Island
Marco Island, Florida
quotes: view all | create


Repressurize Your Tanks-A-Lot
IMPORTANT

IF THE AIR CELL IN A Tanks-A-Lot IS EMPTY OF AIR OR IS LESS THAN 10 PSI, IT HAS BEEN DE-PRESSURIZED!
BEFORE FILLING THE TANK WITH WATER, RE-PRESSURIZE THE AIR CELL WITH AIR!

Use the following instructions for re-pressurizing your unit.
  1. You will need a slotted metal cap to tighten the stem valve and a face-dial air gauge to determine the pressure.
  2. If the stem valve is removed, use the slotted stem valve on the metal cap to insert the stem valve into the threaded opening at the center top of the tank.
  3. Turn the stem until tight.
  4. Apply air compressor to the air cell stem on top of the tank.
  5. When filling the air cell, occasionally measure the air pressure with the air gauge until 10 PSIG is achieved.
  6. Secure the metal cap over the stem valve.