|
 
Three Easy Steps to Assemble Your Tanks-A-Lot
|
Step One - Put the wheels on.
- Slide the alxe that comes in the wheel kit through one wheel.
- Slide the axle through the correct axle sleeve at bottom of frame. (The 10 inch gray wheels go through lower sleeve at bottom corner of frame, the 16 inch black wheels in upper sleeve 3 inches high on the frame.)
- Slide other wheel onto end of axle, and tap on hub cap to secure the wheels.
|  |
 |
Step Two - Attach the casters
- Casters slides up into pre-drilled holes in front of frame.
- Screw lock nuts on tightly.
| |
|
Step Three - Fill with water
- Screw hose end onto water faucet.
- Open ball valve at end of hose.
- Turn water on.
- After tank is full turn off ball valve, and then the faucet. Unscrew hose from faucet.
- Attach your water applicator.
|  |
|
Enjoy Your Tanks-A-Lot
You are ready to water anything with ease. Roll your Tanks-A-Lot where you need water. Tanks-A-Lot moves long distances easiest by tipping onto back wheels and either pushing or pulling, thus balancing the water's weight on larger wheels.
| |
|
